Energy Conservation Audit and Disclosure (ECAD) Ordinance for Single-Family Homes

The Energy Conservation Audit and Disclosure (ECAD) ordinance requires that before sale of their home, owners of a single-family home must have an energy audit performed on the property and must provide a copy of the audit to the purchaser or prospective purchaser. The auditor must provide a copy of the audit to Austin Energy.

Note: Austin Energy has conducted training sessions with many Austin area real estate brokers and agents. These real estate professionals can provide sellers with valuable additional guidance and information about the disclosure requirement and its operation.

Exemptions
Homes meeting any one of the following conditions do not need an audit. The home:

Is less than 10 years old at the time of sale.
Has received at least three energy-efficiency improvements or a total of $500 in rebates through Austin Energy residential energy-efficiency offerings within 10 years before the sale
Has received free energy-efficiency improvements through Austin Energy residential energy-efficiency offerings within 10 years before the sale.
Is a condominium .
Is manufactured housing (a mobile home) built on a permanent chassis and designed for use without a permanent foundation.
Changes ownership and the transfer of the title occurs under one of the following:
- Foreclosure sale, trustee's sale, or deed in lieu of foreclosure
- Pre-foreclosure sale, in which the seller reached an agreement with the mortgage holder to sell the property for an amount less than the amount owed on the mortgage
- Threat or exercise of eminent domain
- Gift from one family member to another family member without consideration
- Court order or probate proceedings
- Decree of legal separation or dissolution of marriage or property settlement agreement incidental to such a decree

Definition of a Single-Family Home
The ECAD ordinance defines a single-family home as a building comprising fewer than five dwelling units. (If your building has five or more dwelling units, see ECAD Ordinance for Multifamily Properties.)

Variances
A home may receive a variance if it meets one of the following conditions:

No later than six months after the sale, the buyer applies for a permit to demolish the home. The seller and buyer must enter into a binding agreement in which the buyer agrees to apply for a permit to demolish the home no later than six months after the sale. View the Variance Application for Residence Demolition.
No later than six months after the sale, the buyer applies for a permit to substantially remodel the home. The seller and buyer must enter into a binding agreement in which the buyer agrees to file an application for a building permit to substantially remodel the above-referenced property no later than six months after the sale and in which the buyer agrees to complete an energy audit within a specified time after the remodel is complete. View the Variance Application for Residence Substantial Remodel.

To apply for a variance, email either the the Variance Application for Residence Demolition form or the Variance Application for Residence Substantial Remodel form, or print out the appropriate one and send it t

Director of Energy Efficiency Services
Austin Energy
811 Barton Springs Road, 3rd Floor
Austin, TX 78704

Energy Efficiency Records
Austin Energy will provide homeowners or prospective buyers with information on the energy-efficiency improvements received by a home through Austin Energy programs. This information includes dates of energy-efficiency improvements or rebates, and dates and details of free energy-efficiency improvements. Call 974-7827 or email Austin Energy with the address of the home and your telephone number.

ECAD Exemption List
Austin Energy also makes available to homeowners a useful ECAD Exemption List.

Single-Family Home Audit
If the home is not exempt or does not qualify for a variance, it needs an ECAD audit.

ECAD Auditors
The ECAD audit must be performed by an auditor who is a certified Residential Energy Services Network (RESNET) Rater or a Building Performance Institute (BPI) Building Analyst Professional. See a list of certified ECAD auditors who have registered with Austin Energy.

What the Auditor Does
An ECAD audit takes about one hour per thousand square feet of property. The ECAD auditor:

Inspects and measures the attic insulation in multiple areas
Pressure tests the duct system and assesses its condition and adequacy
Examines heating and cooling equipment
Inspects weather stripping around exterior doors, plumbing penetrations beneath sinks, and air tightness of attic entries
Identifies and measures the amount of glass in windows that receive more than one hour of direct sunlight each day

Audit Costs
ECAD audits are comprehensive and require specialized equipment for testing the duct system. The estimated cost of an audit is from $200 to $300 for a typical single-family home, 1,800 square feet or smaller, with one air-conditioning system. Auditors set their own prices.

Audit Results
After the audit, the auditor provides the homeowner with the audit report. It includes:

Condition and estimated R-value of the attic insulation
Percentage of air leakage from the duct system and the system’s general condition
Age, efficiency, and overall condition of the heating and cooling equipment
Air leakage around exterior doors, plumbing penetrations beneath sinks, and attic entries
Total square feet of glass and location of windows receiving more than one hour of direct sunlight each day
Opportunities for improving the energy-efficiency of the home

Within 30 days, the auditor sends the audit to Austin Energy, and we enter the information into a database. Austin Energy also runs spot checks of ECAD audits to ensure the quality of the program.

Energy-Efficiency Improvements
The ECAD ordinance does not require homeowners to make energy-efficiency improvements. However, Austin Energy offers rebates and low-cost loans to homeowners who want to improve their home’s energy efficiency.

Enforcement
Non-compliance with the ECAD ordinance is a Class C Misdemeanor. Reported violations will be forwarded to the City of Austin Legal Department for review and action.

These rules do not apply to New homes in the City Of Austin.

Energy Conservation Audit and Disclosure (ECAD) Ordinance for Single-Family Homes

Exemptions Homes meeting any one of the following conditions do not need an audit. The home:

Definition of a Single-Family Home The ECAD ordinance defines a single-family home as a building comprising fewer than five dwelling units. (If your building has five or more dwelling units, see ECAD Ordinance for Multifamily Properties.)

Variances A home may receive a variance if it meets one of the following conditions:

Single-Family Home Audit If the home is not exempt or does not qualify for a variance, it needs an ECAD audit.

ECAD Auditors The ECAD audit must be performed by an auditor who is a certified Residential Energy Services Network (RESNET) Rater or a Building Performance Institute (BPI) Building Analyst Professional. See a list of certified ECAD auditors who have registered with Austin Energy.

What the Auditor Does An ECAD audit takes about one hour per thousand square feet of property. The ECAD auditor:

Audit Costs ECAD audits are comprehensive and require specialized equipment for testing the duct system. The estimated cost of an audit is from $200 to $300 for a typical single-family home, 1,800 square feet or smaller, with one air-conditioning system. Auditors set their own prices.

Audit Results After the audit, the auditor provides the homeowner with the audit report. It includes:

Energy-Efficiency Improvements The ECAD ordinance does not require homeowners to make energy-efficiency improvements. However, Austin Energy offers rebates and low-cost loans to homeowners who want to improve their home’s energy efficiency.